Configure Vendor Option Data Globally
Before you begin
Define the vendor option.
About this task
Perform this procedure to configure DHCP vendor option data global parameters.
Note
The switch follows inheritance and precedence rules for configured DHCP Server options. For more information, see DHCP Server.
Procedure
Example
Configure the vendor option data:
Switch:1>enable Switch:1#config t Switch:1(config)#ip dhcp-server vendor-option-data 2 value 46 <cr>
Variable Definitions
The following table defines parameters for the ip dhcp-server vendor-option-data command.
Variable | Definition |
---|---|
<1-255> |
Specifies the vendor ID. |
value WORD<0-128> |
Specifies a value to apply to this vendor option. |